Gas spring Stabilus 001825

Gas spring mounts are end fittings that connect the spring to the structure. Mount type affects installation, rotation angle, allowable loads and service life.

Common options:

• Ball socket — quick to install and allows free rotation.
• Threaded stud — versatile with brackets or adapters.
• Clevis — reliable pin or bolt mounting for higher loads.
• Rod end bearing — compensates misalignment and reduces rod stress.
• Eyelets and special ends — for non-standard applications.

Consider mechanism design, motion direction and operating conditions. The right mount ensures reliable long-term performance.

On this gas spring (001825) rod mount is S1 (Шаровая опора (гнездо)) cylinder mount is S11 (type not specified).

Rod diameter in millimeters. A larger diameter improves side-load capacity and buckling resistance. Match rod Ø when selecting an equivalent spring.

Before ordering gas spring Stabilus 001825 or VST VSTLE-1023-80-340-500N (R13E102) with delivery to Saint Petersburg, confirm rod Ø 10 mm fits your application.

Outer body (cylinder) diameter. It defines overall size and affects force at a given pressure. Specify cylinder Ø together with rod Ø for accurate replacement.

Cylinder Ø 22 mm on Stabilus 001825 defines body size. Compare with Stabilus 000812 — same cylinder Ø for parameter-based selection.

Working rod stroke — how many millimeters the rod extends when the spring is fully extended. Critical for lids, hatches and moving mechanisms.

Rod stroke 166 mm on gas spring Stabilus 001825 sets how far a lid or hatch opens. In Стандартные with the same stroke: VST VSTS-818-166-588-505N-N0 (S1S1).

Overall length in the fully extended state. Use it to verify the spring fits the assembly without interfering with nearby parts.

Overall length 558 mm on Stabilus 001825 is a key installation dimension. Gas spring VST VSTS-1023-166-558-725N-DN (S1S1) has the same length — compare mounts, rod Ø and force before replacement.

Gas spring force in newtons. It determines whether the spring can hold or lift the load. Small tolerance is acceptable; a large difference changes mechanism behavior.

Force 725 N on gas spring Stabilus 001825 must match your load. VST VSTS-1022-221-736-725N-N (S1S1) has the same force — useful when choosing a replacement. You can then order a gas spring with delivery to Saint Petersburg.

Order gas spring 001825 on the TPK Vesta website: Saint Petersburg stock, delivery to Saint Petersburg and across Russia. Check parameters in the specs table and in blocks «Similar springs» and «VST replacement» before ordering.