Gas spring Stabilus 141510
СтандартныеSpecifications
|
|
mounts | S3 S3 |
|---|---|---|
|
|
Rod Ø | 6 mm |
|
|
Cylinder Ø | 15 mm |
|
|
Rod stroke | 120 mm |
|
|
Length | 316 mm |
|
|
Force | 250 N |
Delivery across Russia. Selected region: Saint Petersburg
VST replacement
Russian VST gas springs — equivalent to 141510 by parameters and mounts. Saint Petersburg stock, delivery across Russia.
Parameter guide
What are mounts? Rod and cylinder end fittings
Gas spring mounts are end fittings that connect the spring to the structure. Mount type affects installation, rotation angle, allowable loads and service life.
Common options:
- Ball socket — quick to install and allows free rotation.
- Threaded stud — versatile with brackets or adapters.
- Clevis — reliable pin or bolt mounting for higher loads.
- Rod end bearing — compensates misalignment and reduces rod stress.
- Eyelets and special ends — for non-standard applications.
Consider mechanism design, motion direction and operating conditions. The right mount ensures reliable long-term performance.
On this gas spring (141510) rod mount is S3 (Шаровая опора (гнездо)) cylinder mount is S3 (Шаровая опора (гнездо)).
What is rod Ø? Rod diameter
Rod diameter in millimeters. A larger diameter improves side-load capacity and buckling resistance. Match rod Ø when selecting an equivalent spring.
Before ordering gas spring Stabilus 141510 or OEM Planmeca 00272179 (300N) Planmeca with delivery to Saint Petersburg, confirm rod Ø 6 mm fits your application.
What is cylinder Ø? Cylinder diameter
Outer body (cylinder) diameter. It defines overall size and affects force at a given pressure. Specify cylinder Ø together with rod Ø for accurate replacement.
Cylinder Ø 15 mm on Stabilus 141510 defines body size. Compare with OEM Planmeca 00272179 (300N) Planmeca — same cylinder Ø for parameter-based selection.
What is rod stroke? Working stroke
Working rod stroke — how many millimeters the rod extends when the spring is fully extended. Critical for lids, hatches and moving mechanisms.
Rod stroke 120 mm on gas spring Stabilus 141510 sets how far a lid or hatch opens. In Стандартные with the same stroke: Suspa 01625012.
What is length? Extended length
Overall length in the fully extended state. Use it to verify the spring fits the assembly without interfering with nearby parts.
Overall length 316 mm on Stabilus 141510 is a key installation dimension. Gas spring Suspa 16-1-154-124-А201-В201/300N has the same length — compare mounts, rod Ø and force before replacement.
What is force? Force in newtons
Gas spring force in newtons. It determines whether the spring can hold or lift the load. Small tolerance is acceptable; a large difference changes mechanism behavior.
Force 250 N on gas spring Stabilus 141510 must match your load. Stabilus 002667 has the same force — useful when choosing a replacement. You can then order a gas spring with delivery to Saint Petersburg.
Where to buy gas spring 141510 with delivery to Saint Petersburg? Order and delivery
Order gas spring 141510 on the TPK Vesta website: Saint Petersburg stock, delivery to Saint Petersburg and across Russia. Check parameters in the specs table and in blocks «Similar springs» and «VST replacement» before ordering.
Similar springs
Matched by rod Ø, cylinder Ø, stroke, length, force and mounts. The percentage shows how closely parameters match this item.
Стандартные
Buy standard gas springs to lift and hold lids, hatches, hoods and panels. 141510: rod diameter 6 mm, cylinder diameter 15 mm, rod stroke 120 mm, extended length 316 mm, force 250 N. End fittings: S3, S3. In stock at TPK Vesta warehouse in Saint Petersburg, delivery across Russia.