Gas spring Stabilus 785867

Gas spring mounts are end fittings that connect the spring to the structure. Mount type affects installation, rotation angle, allowable loads and service life.

Common options:

• Ball socket — quick to install and allows free rotation.
• Threaded stud — versatile with brackets or adapters.
• Clevis — reliable pin or bolt mounting for higher loads.
• Rod end bearing — compensates misalignment and reduces rod stress.
• Eyelets and special ends — for non-standard applications.

Consider mechanism design, motion direction and operating conditions. The right mount ensures reliable long-term performance.

On this gas spring (785867) rod mount is S1B2 (type not specified) cylinder mount is S1B2 (type not specified).

Rod diameter in millimeters. A larger diameter improves side-load capacity and buckling resistance. Match rod Ø when selecting an equivalent spring.

Before ordering gas spring Stabilus 785867 or Stabilus 000685 with delivery to Saint Petersburg, confirm rod Ø 8 mm fits your application.

Outer body (cylinder) diameter. It defines overall size and affects force at a given pressure. Specify cylinder Ø together with rod Ø for accurate replacement.

Cylinder Ø 18 mm on Stabilus 785867 defines body size. Compare with Stabilus 000685 — same cylinder Ø for parameter-based selection.

Working rod stroke — how many millimeters the rod extends when the spring is fully extended. Critical for lids, hatches and moving mechanisms.

Rod stroke 60 mm on gas spring Stabilus 785867 sets how far a lid or hatch opens. In Стандартные with the same stroke: Suspa 01625009.

Overall length in the fully extended state. Use it to verify the spring fits the assembly without interfering with nearby parts.

Overall length 205 mm on Stabilus 785867 is a key installation dimension. Gas spring Stabilus 006244 has the same length — compare mounts, rod Ø and force before replacement.

Order gas spring 785867 on the TPK Vesta website: Saint Petersburg stock, delivery to Saint Petersburg and across Russia. Check parameters in the specs table and in blocks «Similar springs» and «VST replacement» before ordering.