Gas spring Bansbach C5C5-50-219-550-001 100N

Gas spring mounts are end fittings that connect the spring to the structure. Mount type affects installation, rotation angle, allowable loads and service life.

Common options:

• Ball socket — quick to install and allows free rotation.
• Threaded stud — versatile with brackets or adapters.
• Clevis — reliable pin or bolt mounting for higher loads.
• Rod end bearing — compensates misalignment and reduces rod stress.
• Eyelets and special ends — for non-standard applications.

Consider mechanism design, motion direction and operating conditions. The right mount ensures reliable long-term performance.

On this gas spring (C5C5-50-219-550-001 100N) rod mount is U4C (type not specified) cylinder mount is U4C (type not specified).

Rod diameter in millimeters. A larger diameter improves side-load capacity and buckling resistance. Match rod Ø when selecting an equivalent spring.

Before ordering gas spring Bansbach C5C5-50-219-550-001 100N or Stabilus 000685 with delivery to Saint Petersburg, confirm rod Ø 8 mm fits your application.

Outer body (cylinder) diameter. It defines overall size and affects force at a given pressure. Specify cylinder Ø together with rod Ø for accurate replacement.

Cylinder Ø 18 mm on Bansbach C5C5-50-219-550-001 100N defines body size. Compare with Stabilus 000685 — same cylinder Ø for parameter-based selection.

Working rod stroke — how many millimeters the rod extends when the spring is fully extended. Critical for lids, hatches and moving mechanisms.

Rod stroke 219 mm on gas spring Bansbach C5C5-50-219-550-001 100N sets how far a lid or hatch opens. In Стандартные with the same stroke: VST VSTS-1022-219-525-1000N (S1S1B2).

Overall length in the fully extended state. Use it to verify the spring fits the assembly without interfering with nearby parts.

Overall length 550 mm on Bansbach C5C5-50-219-550-001 100N is a key installation dimension. Gas spring VST VSTS-1640-150-550-3000N-P (U7CU7C) has the same length — compare mounts, rod Ø and force before replacement.

Gas spring force in newtons. It determines whether the spring can hold or lift the load. Small tolerance is acceptable; a large difference changes mechanism behavior.

Force 100 N on gas spring Bansbach C5C5-50-219-550-001 100N must match your load. Stabilus 002936 has the same force — useful when choosing a replacement. You can then order a gas spring with delivery to Saint Petersburg.

Order gas spring C5C5-50-219-550-001 100N on the TPK Vesta website: Saint Petersburg stock, delivery to Saint Petersburg and across Russia. Check parameters in the specs table and in blocks «Similar springs» and «VST replacement» before ordering.