Gas spring Bansbach H0E2-82-200-462 --004/500N

Gas spring mounts are end fittings that connect the spring to the structure. Mount type affects installation, rotation angle, allowable loads and service life.

Common options:

• Ball socket — quick to install and allows free rotation.
• Threaded stud — versatile with brackets or adapters.
• Clevis — reliable pin or bolt mounting for higher loads.
• Rod end bearing — compensates misalignment and reduces rod stress.
• Eyelets and special ends — for non-standard applications.

Consider mechanism design, motion direction and operating conditions. The right mount ensures reliable long-term performance.

On this gas spring (H0E2-82-200-462 --004/500N) rod mount is R5 (Резьба штока) cylinder mount is E20 (type not specified).

Rod diameter in millimeters. A larger diameter improves side-load capacity and buckling resistance. Match rod Ø when selecting an equivalent spring.

Before ordering gas spring Bansbach H0E2-82-200-462 --004/500N or VST VSTLE-1023-80-340-500N (R13E102) with delivery to Saint Petersburg, confirm rod Ø 10 mm fits your application.

Outer body (cylinder) diameter. It defines overall size and affects force at a given pressure. Specify cylinder Ø together with rod Ø for accurate replacement.

Cylinder Ø 23 mm on Bansbach H0E2-82-200-462 --004/500N defines body size. Compare with VST VSTLE-1023-80-340-500N (R13E102) — same cylinder Ø for parameter-based selection.

Working rod stroke — how many millimeters the rod extends when the spring is fully extended. Critical for lids, hatches and moving mechanisms.

Rod stroke 350 mm on gas spring Bansbach H0E2-82-200-462 --004/500N sets how far a lid or hatch opens. In Стандартные with the same stroke: Stabilus 095443.

Overall length in the fully extended state. Use it to verify the spring fits the assembly without interfering with nearby parts.

Overall length 782 mm on Bansbach H0E2-82-200-462 --004/500N is a key installation dimension. Gas spring VST VSTS-1023-350-782-1000N-3 (R5E20) has the same length — compare mounts, rod Ø and force before replacement.

Gas spring force in newtons. It determines whether the spring can hold or lift the load. Small tolerance is acceptable; a large difference changes mechanism behavior.

Force 500 N on gas spring Bansbach H0E2-82-200-462 --004/500N must match your load. VST VSTLE-1023-80-340-500N (R13E102) has the same force — useful when choosing a replacement. You can then order a gas spring with delivery to Saint Petersburg.

Order gas spring H0E2-82-200-462 --004/500N on the TPK Vesta website: Saint Petersburg stock, delivery to Saint Petersburg and across Russia. Check parameters in the specs table and in blocks «Similar springs» and «VST replacement» before ordering.