Gas spring Bansbach H2H2-53-070-250--004 530N

Gas spring mounts are end fittings that connect the spring to the structure. Mount type affects installation, rotation angle, allowable loads and service life.

Common options:

• Ball socket — quick to install and allows free rotation.
• Threaded stud — versatile with brackets or adapters.
• Clevis — reliable pin or bolt mounting for higher loads.
• Rod end bearing — compensates misalignment and reduces rod stress.
• Eyelets and special ends — for non-standard applications.

Consider mechanism design, motion direction and operating conditions. The right mount ensures reliable long-term performance.

On this gas spring (H2H2-53-070-250--004 530N) rod mount is E9 (Проушина штока) cylinder mount is E9 (Проушина штока).

Rod diameter in millimeters. A larger diameter improves side-load capacity and buckling resistance. Match rod Ø when selecting an equivalent spring.

Before ordering gas spring Bansbach H2H2-53-070-250--004 530N or VST VSTLE-1023-80-340-500N (R13E102) with delivery to Saint Petersburg, confirm rod Ø 10 mm fits your application.

Outer body (cylinder) diameter. It defines overall size and affects force at a given pressure. Specify cylinder Ø together with rod Ø for accurate replacement.

Cylinder Ø 28 mm on Bansbach H2H2-53-070-250--004 530N defines body size. Compare with Stabilus 000657 — same cylinder Ø for parameter-based selection.

Working rod stroke — how many millimeters the rod extends when the spring is fully extended. Critical for lids, hatches and moving mechanisms.

Rod stroke 70 mm on gas spring Bansbach H2H2-53-070-250--004 530N sets how far a lid or hatch opens. In Стандартные with the same stroke: Stabilus 005456.

Overall length in the fully extended state. Use it to verify the spring fits the assembly without interfering with nearby parts.

Overall length 250 mm on Bansbach H2H2-53-070-250--004 530N is a key installation dimension. Gas spring VST VSTS-818-83-250-260N-DN (S1S1B2) has the same length — compare mounts, rod Ø and force before replacement.

Gas spring force in newtons. It determines whether the spring can hold or lift the load. Small tolerance is acceptable; a large difference changes mechanism behavior.

Force 530 N on gas spring Bansbach H2H2-53-070-250--004 530N must match your load. VST VSTS-615-150-365-530N (1A6A) has the same force — useful when choosing a replacement. You can then order a gas spring with delivery to Saint Petersburg.

Order gas spring H2H2-53-070-250--004 530N on the TPK Vesta website: Saint Petersburg stock, delivery to Saint Petersburg and across Russia. Check parameters in the specs table and in blocks «Similar springs» and «VST replacement» before ordering.